Product Overview
The KEW 8161 is an AC clamp-type current sensor (clamp adaptor) designed to convert AC current into a proportional voltage that can be measured using a digital multimeter or other compatible measuring devices. Instead of interrupting a circuit or breaking the conductor, a conductor (wire) is simply clamped inside the sensor’s jaws — making it a non-intrusive and safe method to measure current. The clamp accommodates conductors up to about 24 mm diameter.
Specification
| Conductor size | Ø24 |
|---|---|
| Rated current | AC 100A |
| Output voltage | AC 1000mV / AC 100A (AC 10mV/A) |
| Accuracy | ±2.0%rdg±3.0mV (45 to 65Hz) ±2.5%rdg±3.0mV (65Hz to 1kHz) |
| Cable length | Approx. 1.2m |
| Output connector | Ø4mm banana plug |
| Output impedance | Approx. 22Ω |
| Applicable standards | IEC 61010-1 CAT III 300V pollution degree 2 , IEC 61010-2-032 |
| Operating temperature and humidity range | -10 to 50°C , less than 85% RH (without condensation) |
| Dimension | 97(L) × 59(W) × 26(D) mm |
| Weight | Approx. 120g |
| Accessories | Instruction manual |
Catalog & Document
-
- Instruction Manual
