Kyoritsu KEW 2062BT Clamp Power Meter

Kyoritsu KEW 2062BT Clamp Power Meter

Features

  • Various measurement functions: Measurements of current, voltage, power, harmonics and phase detection are possible; True RMS: Indicates a correct value at the distorted waveform; Functions of PEAK, MAX, MIN, AVG are available. Easy to check the temporal change in the power source; LCD can display simultaneously the values of voltage and frequency or power and power factor
  • Power measurement: Power measurement on any wiring system is possible
  • Harmonics measurement: Harmonics of the voltage and current, which cause various failures at the field, can be measured
  • Phase detection: Positive phase, negative phase and missing phase can be confirmed by the buzzer sound and the display without changing the connection of the leads
  • Connectivity: Dedicated application “KEW Power”supports both Android and iOS; LCD display can be checked at the smart devices; Measured values and graphs can be stored with a press of a button; Voltage and current can be shown in the waveform display. Existence of the harmonics can be found easy; Threshhold of each measured value can be set at the applicaion, and PASS and FAIL judgement is possible
Category:

Kyoritsu KEW 2062BT Clamp Power Meter

Features a teardrop shape jaw with a conductor size of 2.17″ (55 mm) and is convenient to use at a small-sized office and factory with Bluetooth communication functions.

Specification

Wiring connections 1P2W, 1P3W, 3P3W, 3P4W
Measurements and
parameters		 Voltage, Current, Frequency, Active power, Reactive power, Apparent power, Power factor(cosθ), Phase angle, Harmonics(THD-R/THD-F), Phase rotation
ACV
Range 1000V
Accuracy ±0.7%rdg±3dgt (40.0 to 70.0Hz)
±0.3%rdg±5dgt (70.1Hz to 1KHz)
Crest factor 1.7 or less
ACA
Range 40.00/400.0/1000A (3 range auto)
Accuracy ±1.0％rdg±3dgt (40.0 to 70.0Hz)
±2.0％rdg±5dgt (70.1Hz to 1kHz)
Crest factor 3 or less on 40.00A/400.0A range, 3 or less 1500A peak on 1000A range
Frequency
Display Range 40.0 to 999.9Hz
Accuracy ±0.3％rdg±3dgt
Active power
Range 40.00/400.0/1000kW
Accuracy ±1.7%rdg±5dgt (PF1, sine wave, 45 to 65Hz)
Apparent power
Range 40.00/400.0/1000kVA
Accuracy ±1dgt against each calculated value
Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
Reactive power
Range 40.00/400.0/1000kVar
Accuracy ±1dgt against each calculated value
Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
Power factor
Display Range -1.000 to 0.000 to +1.000
Accuracy ±1dgt against each calculated value
Sum: add errors of each channel, 3P3W: ±2dgt, 3P4W:±3dgt
Phase angle (1P2W only)
Display Range -180.0 to 0.0 to +179.9
Accuracy Within ±3.0°
Harmonics RMS(Content rate)
Analysis order 1st to 30th order
Accuracy ±5.0％rdg ± 10dgt (1 to 10th)
±10％rdg ± 10dgt (11 to 20th)
±20％rdg ± 10dgt (21 to 30th)
Total harmonics THD-R/THD-F
Display Range 0.0% to 100.0%
Accuracy ±1dgt against the calculated results of each measured value
Phase rotation ACV 80 to 1100V (45 to 65Hz)
Other functions MAX/MIN/AVG/PEAK, Data hold, Bluetooth®, Backlight, Auto power off
General
Communication
interface		 Bluetooth® 5.0
Power source LR6 (AA) (1.5V) ×2
Continuous
measuring time		 Approx. 58 hours
Conductor size φ55 mm max.
Dimension / Weight 247(L) × 105(W) × 50(D) mm / Approx. 490g (including batteries)
Applicable standards IEC 61010-1, IEC 61010-2-032, IEC 61326-1,2-2 ClassB
CAT Ⅳ 300V / CAT Ⅲ 600V / CAT Ⅱ 1000V Pollution degree 2
Accessories 7290 (Test leads)
9198 (Carrying Case)
LR6(AA)×2, Instruction Manual

Reviews

There are no reviews yet.

Be the first to review “Kyoritsu KEW 2062BT Clamp Power Meter”

Your email address will not be published. Required fields are marked *

Related products